张涛 工学博士 副教授
研究方向：
精密与超精密加工技术；
加工过程多尺度数值仿真；
加工过程力学及摩擦学；
教育经历
工学学士 华侨大学机电及自动化学院 2011.09-2015.06
工学博士 华侨大学制造工程研究院（硕博连读） 2015.09-2021.11
工学博士 伍伦贡大学工程与信息科学学院 2020.08-2024.01
主要工作经历
厦门理工学院金沙9159游戏入口 副教授 2024年11月-至今
主要获奖
2020年“好设计”创意奖（第一完成人，国家科学技术奖励办公室备案奖项）；
第十六届福建省自然科学优秀学术论文一等奖（第一作者）；
伍伦贡大学优秀博士论文；
2022年国家优秀自费留学生奖学金。
主持或参与的主要项目：
河北钢铁集团重点研发项目：基于新颖建模的980MPa级先进高强汽车钢组织-使用性能定量关系研究（主研）；
国家重点研发计划项目：超声-激光原位复合超精密切削理论与技术（参与）；
国家重点研发计划“科技冬奥”项目：基于雪上运动项目人-板-环境特征的高性能雪板研发与示范应用（参与）。
学术论文：
[1]T. Zhang, H. Xie, M. Huo, F. Jia, L. Li, D. Pan, H. Wu, J. Liu, T. Yang, X. Zhang, F. Jiang, Z. Jiang, Microstructure-based modelling of formability for advanced high strength dual-phase steels. Materials Science and Engineering A. 915 (2024).(Top期刊)
[2]T. Zhang (通讯作者), H. Xie, M. Huo, F. Jia, L. Li, D. Pan, H. Wu, J. Liu, T. Yang, X. Zhang, F. Jiang, Z. Jiang, A microstructure-based multiscale approach to predict the formability of multiphase steels, International Journal of Mechanical Sciences. 253 (2023).(Top期刊)
[3] S. Huang,T. Zhang (通讯作者),Z. Wang, L. Cheng, X. Zha, B. Guo, D. Zheng, H. Xie, Z. Xiang, Y. Chen, F. Jiang, Asymmetrical cutting-edge design of broaching tool based on FEM simulation, Journal of Materials Research and Technology. 25 (2023).(Top期刊)
[4] J. Li, F. Jiang, A. Jin,T. Zhang (通讯作者), X. Wang, S. Huang, X. Zeng, H. Yao, D. Zhu, X. Wu, L. Yan, X. Zha, B. Guo, FE modelling and simulation of the turning process considering the cutting induced hardening of workpiece materials, Journal of Materials Research and Technology. 27 (2023).(Top期刊)
[5]T. Zhang, H. Xie, M. Huo, F. Jia, L. Li, D. Pan, H. Wu, J. Liu, T. Yang, F. Jiang, Z. Jiang, A method for the determination of individual phase properties in multiphase steels, Materials Science and Engineering A. 854 (2022).(Top期刊)
[6]T. Zhang, L. Yan, L. Li, M. Huo, H. Wu, X. Zha, N. Wang, X. Wu, F. Jiang, Z. Jiang, X. Xu, Grain size dependence of modified material constitutive model for OFHC copper, Journal of Materials Research and Technology. 20 (2022).(Top期刊)
[7]T. Zhang, F. Jiang, H. Huang, J. Lu, Y. Wu, Z. Jiang, X. Xu, Towards understanding the brittle-ductile transition in the extreme manufacturing, International Journal of Extreme Manufacturing. 3 (2021).(Top期刊)
[8]T. Zhang, F. Jiang, L. Yan, Z. Jiang, X. Xu, A novel ultrahigh-speed ball-on-disc tribometer, Tribology International. 157 (2021).(Top期刊)
[9]T. Zhang, F. Jiang, L. Yan, X. Xu, Research on the Size Effect of Specific Cutting Energy Based on Numerical Simulation of Single Grit Scratching, Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140 (2018).
[10]T. Zhang, F. Jiang, L. Yan, X. Xu, FEM modeling of the relationship between the high-temperature hardness and high-temperature, quasi-static compression experiment, Materials. 11 (2017).
[11]T. Zhang, F. Jiang, L. Yan, X. Xu, Research on the Stress and Material Flow with Single Particle—Simulations and Experiments, Journal of Materials Engineering & Performance. 26 (2017) .
[12] J. Li, F. Jiang, N. Wang, S. Huang,T. Zhang (通讯作者), A. Jin. H. Yao,et al.A synchronous wear design for inner and outer inserts of indexable drill based on numerical simulation. The International Journal of Advanced Manufacturing Technology (In press)
[13] S. Huang, F. Jiang,T. Zhang, H. Cui. Advances in polycrystalline diamond (PCD) micro drills for efficient micro-hole machining in hard-brittle materials: a review of design, fabrication, and performance. Materials and Manufacturing Processes. 40 (2024).(Top期刊)
[14] L. Li, H. Liu, H. Xie,T. Zhang, H. Tian, S. Zhang, et al. Finite element analysis of strip shape regulation ability of work roll shifting in a 4-high hot strip mill. Journal of Manufacturing Processes. 131（2024）(Top期刊)
[15] M. Huo, H. Xie,T. Zhang, G. Su, L. Li, et al. Multiscale analysis of microstructure-based bending characteristics of advanced high strength dual-phase steel. Journal of Iron and Steel Research International (2024)
[16] S. Huang, F. Jiang, T. Qiu，T. Zhang, T. Qiu, X. Wu, et al. The fabrication of polycrystalline diamond micro drill based on ultrashort pulsed laser.The International Journal of Advanced Manufacturing Technology. 131 (2024)
[17] L. Li, H. Xie,T. Zhang, M. Huo, D. Pan, H. Wu, F. Chen, T. Liu, X. Li, X. Liu, H. Liu, Z. Jiang, Understanding the regulation ability of roll bending on strip shape in a CVC-6 tandem cold mill using a 3D multiple stand FE model, Journal of Manufacturing Processes, 101 (2023).(Top期刊)
[18] L. Li, H. Xie,T. Zhang, M. Huo, D. Pan, H. Wu, F. Chen, T. Liu, X. Li, X. Liu, H. Liu, Z. Jiang, Influences of thermal crown and wear crown of work roll on strip shape in tandem cold rolling using a novel 3D multi-pass FE model,Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, (2023).
[19] Z. Li, F. Jiang, Z. Jiang, Z. Tian, T. Qiu,T. Zhang, Q. Wen, X. Lu, J. Lu and H. Huang, Energy beam-based direct and assisted polishing techniques for diamond: A review International Journal of Extreme Manufacturing. 6 (2023).(Top期刊)
[20] J. Deng, F. Jiang, X. Zha,T. Zhang, H. Yao, D. Zhu, H. Zhu, H. Xie, F. Wang, X. Wu, L. Yan, Impact Resistance of CVD Multi-Coatings with Designed Layers, Coatings. 13 (2023).
[21] D. Pan, G. Zhang, F. Jia, L. Li,T. Zhang, Y. Lu, H. Wu, M. Yang, Z. Jiang, Analysis of TiO2 Nanolubricant Influence in Micro Deep Drawing of Stainless Steel SUS301, Materials. 16 (2023) 2196.
[22] D. Pan, G. Zhang, H. Wu, F. Jia, L. Li,T. Zhang, M. Yang, Z. Jiang, Tribological behaviour of ultra-thin stainless steel in micro deep drawing with graphene nanosheets, Wear. (2023).(Top期刊)
[23] X. Zha, T. Wang, B. Guo, F. Chen, L. Lin,T. Zhang, F. Jiang, Research on the oxidation resistance and ultra-high frequency thermal fatigue shock failure mechanisms of the bilayer and multilayer nano-coatings on cemented carbide tools, International Journal of Refractory Metals & Hard Materials. 110 (2023).(Top期刊)
[24] X. Zha, Z. Yuan, H. Qin, L. Xi, B. Guo,T. Zhang, F. Jiang, Coupling mechanisms of static and dynamic loads during the ultrasonic impact strengthening of Ti-6Al-4V, International Journal of Advanced Manufacturing Technology. (2023).
[25] L. Li, H. Xie,T. Zhang, D. Pan, X. Li, F. Chen, T. Liu, X. Liu, H. Liu, L. Sun, Z. Jiang, Influence of intermediate roll shifting on strip shape in a CVC-6 tandem cold mill based on a 3D multi-stand FE model, International Journal of Advanced Manufacturing Technology. 121 (2022).
[26] L. Li, H. Xie, X. Li,T. Zhang, D. Pan, M. Huo, F. Chen, T. Liu, K. Shi, Z. Jiang, Numerical Analysis of the Effect of Work Roll Bending on Strip Crown During Tandem Hot Rolling, International Journal of Applied Mechanic. 14 (2022).
[27] M. Huo, H. Xie,T. Zhang, L. Li, F. Lin, F. Chen, J. Liu, T. Yang, V. Linton, Z. Jiang, Microstructure-Based Modelling of Elastoplastic Properties and Deformation Characteristics of Advanced High Strength Dual-Phase Steel, Metals and Materials International. (2022).
[28] J. Kong,T. Zhang, D. Du, F. Wang, F. Jiang, W. Huang, The development of FEM based model of orthogonal cutting for pure iron, Journal of Manufacturing Processes. 64 (2021).
[29] Z. Liao, S. Zhang, S. Wei, C. Zhang,T. Zhang, F. Jiang, Research Status and Development Trend of Ice and Snow Sliding Friction, Mocaxue Xuebao/Tribology. 41 (2021).
[30] J. Kong,T. Zhang, D. Du, F. Wang, F. Jiang, W. Huang, The development of FEM based model of orthogonal cutting for pure iron, Journal of Manufacturing Processes. 64 (2021) 674–683.(Top期刊)
[31] X.Wang, F. Jiang,T. Zhang, L. Wang, Study on dynamic mechanical properties and constitutive model of 10B/Al composite compared with its matrix of high-purity aluminum, J Material Science. 55 (2020) 748–761.
[32] L. Zhang,T. Zhang, B. Guo, L. Yan, F. Jiang, Research on the single grit scratching process of oxygen-free copper (OFC), Materials. 11 (2018).
[33] F. Jiang,T. Zhang, L. Yan, Analytical model of milling forces based on time-variant sculptured shear surface, International Journal of Mechanical Sciences, 115–116 (2016).(Top期刊)
[34] F. Jiang,T. Zhang, L. Yan, Estimation of temperature-dependent heat transfer coefficients in near-dry cutting, International Journal of Advanced Manufacturing Technology. 86 (2016).
专利：
申请发明专利73项，已授权发明专利51项，授权实用新型专利32项，代表性发明专利如下：
[1]姜峰，张涛，言兰，徐西鹏，一种CBN刀具预修黑色金属试件的磨粒划擦快停测试方法，ZL201610077826.7，2019-01-29，发明专利；
[2]姜峰，张涛，李云梅，丁乙，刘道辉，张丽彬，邵永吉，刘天畅，一种翻转下料装置，ZL201510139905.1，2017-07-21，发明专利；
[3]姜峰，张涛，言兰，徐西鹏，一种球形磨头预修黑色金属试件的单颗磨粒连续划擦测试方法，ZL201610077955.0，2018-04-17，发明专利；
[4]姜峰，张涛，张锦忠，自动补偿移动电极清灰装置，ZL201610090966.8，2017-12-01，发明专利；
[5]姜峰，张涛，言兰，徐西鹏，一种预修摩擦副的高速润滑性能试验机及其应用，ZL201610077921.7，2018-08-10，发明专利；
[6]姜峰，张涛，言兰，徐西鹏，一种预修摩擦副的高速润滑性能测试方法，ZL201610078083.5，2018-05-25，发明专利；
[7]姜峰，张涛，言兰，徐西鹏，一种预修摩擦副的高速摩擦试验机及其应用，ZL201610077925.5，2019-01-01，发明专利；
[8]姜峰，张涛，言兰，徐西鹏，一种用于高速划擦试验机的工具头夹紧装置，ZL201610078017.8，2018-08-28，发明专利；
[9]姜峰，张涛，言兰，徐西鹏，一种超薄涂层的高速摩擦测试方法，ZL201610077943.3，2018-05-25，发明专利；
[10]姜峰，张涛，言兰，徐西鹏，单颗磨粒高速连续划擦试验机的进给轴调平系统及方法，ZL201610077790.2，2018-08-10，发明专利；
[11]张涛，李云梅，丁乙，刘道辉，张丽彬，邵永吉，刘天畅，姜峰，一种自动拆包下料装置，ZL201510116184.2，2017-06-20，发明专利；
[12]姜峰，张涛，言兰，徐西鹏，一种球形磨头预修黑色金属试件的单颗磨粒连续划擦干涉行为测试方法，ZL201610078012.5，2018-05-25，发明专利；
联系方式：
Email: zhangtao@xmut.edu.cn
